Miyota · Automatic caliber guide

9015

A slim movement. A useful date.

The 9015 fits hours, minutes, central seconds, and a quickset date into a 3.90 mm movement. It offers the same 4 Hz beat rate and approximate 42-hour reserve as the no-date 9039, with a calendar for readers who like that extra piece of everyday information.

Explore watches using it
A study in dimensions
Ø 26.00 mm 3.90 mm
Outside diameter & movement height. Enlarged outlines, not a parts drawing.

The reference card

9015 specifications

Published figures, with the context that makes them useful.

Movement type
Automatic mechanicalCrown hand winding and stop-seconds (hacking) supported.
Power reserve
Approx. 42 hMiyota’s published figure for a fully wound movement.
Frequency
28,800 bph · 4 Hz8 beats each second; 4 complete balance oscillations.
Published accuracy
−10 / +30 s/dayThe movement maker’s stated range. A watch brand’s own regulated tolerance may be different.
Outside diameter
26.00 mmOutside diameter from Miyota’s specification drawing.
Movement height
3.90 mmMovement only. The finished watch will be thicker.
Jewels
24Jewel count is a construction detail, not a quality rating.
Display & calendar
Three central hands + dateQuickset date at the first crown click; time setting and hacking at the second.

Specification reference: Miyota — 9015 product specifications. These are published specifications, not measurements from my own testing. All manufacturer sources ↓

My take

What I would look for

I would choose between a 9015 watch and a 9039 watch by asking whether I actually use the date. If I do, the 9015 offers it without an increase in the published movement height. I would then compare the case dimensions, dial readability, and the watch brand’s timekeeping commitment.

What it brings

  • A date display in the same 3.90 mm movement height as the no-date 9039.
  • Hand winding and hacking make it easy to restart and synchronize.
  • Its 4 Hz frequency gives eight seconds-hand steps per second.

What to weigh up

  • The date adds an AM/PM check and a calendar correction after a long rest.
  • Approximately 42 hours does not cover a full Friday-evening-to-Monday-morning break.
  • The caliber alone does not establish the finished watch’s thickness or accuracy.

Beyond the spec sheet

Living with the 9015

Restart, then synchronize

Wind clockwise with the crown in its normal position. Miyota’s manual says a few turns will start the movement; that is not a full-reserve claim. At the second click, the seconds hand stops so you can set the time. Unlock a screw-down crown first, following the watch’s manual. [source]

Respect the calendar window

Miyota says not to quickset the date between about 8:30 p.m. and 2 a.m., according to the time shown by the watch. The date may fail to change the next day if adjusted during that interval. Move the hands outside it before using the first crown click for date correction. [source]

Read the finished watch’s specification

Two brands can regulate the same base movement differently. Look for the tolerance stated for the exact watch, and keep that separate from Miyota’s movement specification. If a product page and its manual disagree, ask the brand which applies to your reference.

Compare the tradeoffs

Other calibers to know

Useful comparisons for choosing a watch. These are not claims of parts compatibility.

Compare all 6 calibers ↗

The movement, in a watch

Watches using the 9015

A selected starting list, grouped by brand. Each exact model below has a manufacturer source confirming the caliber.

Links marked “affiliate” may earn me a commission at no extra cost to you. Editorial priorities come first; affiliate availability only breaks ties. It does not change my review ratings.

Vaer

A5 Field Black Auto - 40mm USA

Manufacturer-verified example

Reference A5-FB-FKM20BLK-NY20KHA

The A5 Field Black automatic product page explicitly identifies Miyota 9015. Vaer’s similarly styled C5 is a different, solar-powered watch.

Sternglas

Hamburg Pro Automatik Alabaster

Manufacturer-verified example

Reference S02-HP26-VI15

The Hamburg Pro Automatik Alabaster specifies Miyota 9015. The Pro designation matters; other Hamburg models have different movements.

Model and caliber checked October 14, 2026. Specifications and stock can change; confirm the exact reference with the seller. A manufacturer-verified example is not a hands-on review.

Quick answers

Common questions

What is the difference between the Miyota 9015 and 9039?

The 9015 has a date and a separate quickset position. The 9039 is a true no-date movement. Their published frequency, movement height, approximate reserve, and accuracy range match, but that does not make them interchangeable.

Does the Miyota 9015 hack and hand-wind?

Yes. Turning the crown in its winding position adds energy, and pulling it to the time-setting position stops the seconds hand. The watch brand’s manual explains any screw-down crown.

Is the Miyota 9015 better than the Sellita SW200-1?

I would not make that judgment from the names alone. The 9015 has a thinner movement and a similar headline reserve; the SW200-1 comes in different executions. The complete watch’s accuracy commitment, case, warranty, and service options are more useful buying criteria.

Check the details

Sources & verification

Movement specifications checked . Watch-specific evidence is linked with each example above. I keep manufacturer claims separate from my editorial assessment and any hands-on review.

  1. Miyota — 9015 product specificationsCurrent frequency, accuracy, approximate reserve, jewels, functions, and calendar options.
  2. Miyota — 9015 specification sheet (PDF)26.00 mm outside diameter, 3.90 mm height, and date-setting restriction.
  3. Miyota — 9015/9019 instruction manual (PDF)Winding, crown positions, hacking, and the 8:30 p.m.–2 a.m. calendar caution.
  4. Miyota — movement catalog (PDF)90-series calendar variants and the 9019’s lower hand-fitting height.